• img1
  • img2
  • img3

+86-21-57490150

sales@yongran-dida.com

Home > News > Content
Why Is The Precise Adjustment Of The Cutting Pressure Of Electric Brick And Stone Cut Off Machine?

Why is the precise adjustment of the cutting pressure of Electric Brick and Stone Cut off Machine?
    Since the water cutting technology and Electric Brick and Stone Cut off Machine after the popularity of many industries have provided a fast and convenient solution, so that it can get the desired cutting effect, by virtue of the water cutting technology is the diversity, high efficiency and so on. Of course, in addition to the advantages of technology and equipment itself, the precise adjustment of waterjet cutting pressure is also critical, can not ignore this point.
    Although the use of Electric Brick and Stone Cut off Machine for cutting more and more, but many people are long-term Electric Brick and Stone Cut off Machine fixed at the same pressure for cutting operations, few people will be different materials, different circumstances to reasonable Adjust the pressure of the water knife.
    But in fact, each cutting board material is not the same, then the use of Electric Brick and Stone Cut off Machine cutting the required cutting pressure is also different. We need to cut according to the different conditions of the plate, such as different materials, different thickness, etc., reasonable adjustment of Electric Brick and Stone Cut off Machine cutting pressure.
    Such as cutting the general stone, used to do the parquet of stone are generally marble, relatively speaking, hardness is not high, so the Electric Brick and Stone Cut off Machine pressure control in 220MPa to 250Mpa or so on it. And if you want to cut the same thickness of the metal material, then the Electric Brick and Stone Cut off Machine pressure to reach 350MPa to 380MPa, and also once again based on the addition of pomegranate sand can.
    Electric Brick and Stone Cut off Machine as a mechanical product, is to have their own speed, no matter how easy the material cutting, cutting the speed is also limited. The greater the pressure of Electric Brick and Stone Cut off Machine, the greater the cost of consumption, if only cut a material, only need to start the pressure to adjust to the appropriate range on it.
  In order to achieve the desired operating effect of the ultrahigh-voltage Electric Brick and Stone Cut off Machine, it is necessary to set the position of the equipment according to the site layout and the foundation installation plan before installing it first. Then install it according to the order of the tunnel cutting machine from the processing to the finished product The
    This process should be noted that the Electric Brick and Stone Cut off Machine on each component installed in place, it should be adjusted to the initial qualified state, and then the next link to install. After the installation of the entire Electric Brick and Stone Cut off Machine but also to adjust the relative position, the basic requirements of the operating platform and cutting platform have a certain distance, the pressure supercharger and sand for the same phase.
     After the installation is adjusted, let the Electric Brick and Stone Cut off Machine run for a while, observe whether the equipment is running smoothly, no swing and abnormal sound. At the same time, but also check the Electric Brick and Stone Cut off Machine head fastening, to prevent the loose and damage to the material.
     In the Electric Brick and Stone Cut off Machine, a specially designed control system for the process is used to ensure that the system can use the controller to reduce or increase the water pressure; at the same time to check the vacuum auxiliary device or other technology to improve the cutting efficiency and cutting Accuracy.
     Not only that, Electric Brick and Stone Cut off Machine in the CNC system can also achieve the simulation track processing, automatic control cut and cut, and accurately calculate the cutting time; can also set the axis of the software limit, protect the tip, to avoid the trip range. As the Electric Brick and Stone Cut off Machine CNC system, to meet the computer and hardware requirements, on this basis to achieve the above objectives.
For Electric Brick and Stone Cut off Machines, there are significant differences between the servo drive system and the stepper drive system, which will first be reflected in the control accuracy. Since the stepper motor is an actuator in a digital control system, it converts the pulse electrical signal into a corresponding angular displacement, and the angular displacement is proportional to the number of pulses, which is proportional to the pulse frequency so that it can be In the range by changing the pulse frequency to speed.

Contact Us
Shanghai Yongran Construction Machinery Manufacturing Co.,Ltd

Address: No.25 Xinnuo Road, Xinshen Industrial Park, Zhelin, Fenxian, Shanghai, China

Tel: +86-21-57490150

Fax: +86-21-37523099

E-mail: sales@yongran-dida.com

Copyright © Shanghai Yongran Construction Machinery Manufacturing Co.,Ltd. All Rights Reserved.
foottop