• img1
  • img2
  • img3

+86-21-57490150

sales@yongran-dida.com

Home > News > Content
What Happens When The Circuit Of The Electric Tile Cut Off Machine Is Broken?

What happens when the circuit of the Electric Tile Cut off Machine is broken?
When the circuit of the Electric Tile Cut off Machine is cut off by the relay, the electric ion in the circuit of the Electric Tile Cut off Machine is detrimental to the relay. In practice, the relay of the Electric Tile Cut off Machine extends the arc and increases the degree of corrosion of the contacts. Tests show that the Electric Tile Cut off Machine's vacuum contact relays are more suitable for the power outage of the Electric Tile Cut off Machine because it suppresses the arc in the circuit, that is, what we say. Arc suppression reduces the corrosion of Electric Tile Cut off Machine and extends the life of the Electric Tile Cut off Machine. Conventional Electric Tile Cut off Machine The contact resistance of the relay varies with the number of times of use, but the contact resistance of the vacuum relay of the Electric Tile Cut off Machine is constant and the resistance is low, the contacts are silver- Will improve the stability of the pneumatic relay of the Electric Tile Cut off Machine and reduce the resistance at the time of contact.
Electric Tile Cut off Machine's inflatable relays are available as high-voltage power switches for the Electric Tile Cut off Machine and feature a normally open and closed contact. An important reason is that the gas, the mixed gas and the air pressure can also be set in advance, and the discharge of the arc before the contact is closed. In addition, if the voltage in the circuit of the Electric Tile Cut off Machine is higher than 3500 volts, even if the circuit of the Electric Tile Cut off Machine is forced to cut off due to the jitter of the contact, the arc can still be sufficiently stable to maintain the current. This helps to extend the life of the inflatable relay of the Electric Tile Cut off Machine, which can be verified in the electric discharge of the Electric Tile Cut off Machine circuit because of the special performance of the Electric Tile Cut off Machine's high-voltage relay, which makes Electric Tile Cut off Machine's inflatable contact high voltage relays are widely used.
Some of the use of wire rope Electric Tile Cut off Machine customers are inappropriate, usually advance notice, 2.3 million meters of wire rope. Therefore, the choice of Electric Tile Cut off Machine wire rope is very important, a good wire rope Electric Tile Cut off Machine The total drilling depth of more than 2000 meters is no problem, some even deeper (affected by the impact of various soil ). At present, Electric Tile Cut off Machine manufacturers have 31, Xugong, Zoomlion, Kim Bie and other units, wire rope has a lot of choices, especially the domestic brands, the country's wire rope due to the price is not high, has gradually replaced imports Of the wire rope, but also as a necessary condition for Electric Tile Cut off Machine.
Tensile strength is not required for the wire rope of Electric Tile Cut off Machine, but it must have good bending performance and fatigue resistance and abrasion resistance (the number of strands required, the thickness of wire, etc.); Limit, and often have to withstand high temperatures, which requires Electric Tile Cut off Machine wire rope core is a metal core, because the Electric Tile Cut off Machine wire rope can withstand high temperatures, can withstand the impact and reverse performance, Non-rotating Electric Tile Cut off Machine
Construction units and individuals must be reminded to be sure to pay attention to the wire rope of Electric Tile Cut off Machine: Electric Tile Cut off Machine Each turn of the wire rope, we must check the drum, check the edge of the drum groove, because the Electric Tile Cut off Machine Long-term wear, the edge of the drum groove will form an acute angle, this angle will cut the Electric Tile Cut off Machine gold wire rope, there may be cut off the Electric Tile Cut off Machine wire rope, causing an accident. When the drum wears severely, the spool must be replaced, and when the edge of the groove looks sharp, the edge must be sharpened. The builder must pay close attention to the stress condition of the wire rope of the Electric Tile Cut off Machine. Electric Tile Cut off Machine Any part of the wire rope or split or rupture must cause sufficient vigilance.

Contact Us
Shanghai Yongran Construction Machinery Manufacturing Co.,Ltd

Address: No.25 Xinnuo Road, Xinshen Industrial Park, Zhelin, Fenxian, Shanghai, China

Tel: +86-21-57490150

Fax: +86-21-37523099

E-mail: sales@yongran-dida.com

Copyright © Shanghai Yongran Construction Machinery Manufacturing Co.,Ltd. All Rights Reserved.
foottop