• img1
  • img2
  • img3

+86-21-57490150

sales@yongran-dida.com

Home > News > Content
Reinforced Electric Tile Cut Off Machine Operation Noise How To Deal With

Reinforced Electric Tile Cut off Machine operation noise how to deal with
After a lot of customer response, reinforced Electric Tile Cut off Machine sometimes in the course of the operation will be a lot of noise, which is a headache. Generally speaking, there are many factors in the noise of the Electric Tile Cut off Machine, which may be due to the problem of the electric porcelain cutting mechanism of the machine. It may also be because the loosening of the screw of the machine shell is caused by the vibration of the shell. Basically, Point to solve, basically can solve the problem. The following specific to explain some of the programs for everyone.
  First of all, the case of power outages, check the reinforced Electric Tile Cut off Machine mechanism, there is no deformation of the bending of the situation, if there is, it may be in the straightening process is not in accordance with the operating procedures to operate, the need to replace the porcelain cutting machine Parts, you can.
  Second, look at the outer surface of the parcel machine if there is a loose screw, if the screw loose in the process of straightening will appear vibration, vibration will cause the outer surface of the package shock, the formation of resonance caused by noise is particularly large, there should be noted that Should be tightened as soon as possible screws, skin exfoliation may lead to personal or equipment damage, should pay special attention.
  Finally, it is possible that because of the motor factors, the motor because of the impact of excessive power may be damaged, resulting in over-electrical phenomenon of vibration, in which case press the emergency stop button to avoid the motor burned , The cause may be due to the voltage is too high too low, or because the straight too much overload caused.
  In addition, we need to pay special attention to the above three solutions should be in the steel Electric Tile Cut off Machine power off the case. I hope everyone in the process of dealing with the need to be careful operation, so as to avoid unnecessary losses.
Reinforced Electric Tile Cut off Machine is the construction site of the most commonly used a kind of steel processing equipment, is also an indispensable machine on the site, many users in the selection of reinforced Electric Tile Cut off Machine when the hand is not enough measures, do not know what kind of machine Is a good machine. As a result of the production of reinforced Electric Tile Cut off Machine manufacturers is too much, many users usually do not know how to pick. Today, we specifically talk about how to choose reinforced Electric Tile Cut off Machine.
  As the market sells the quality of the Electric Tile Cut off Machine is good and bad, in order to allow more users to learn to discuss the reinforced Electric Tile Cut off Machine, the purchase of the machine will be specific considerations: check the fuselage welding is not strong, Is not neat, the margin is not a burr, the surface is not flat. Check the reinforced Electric Tile Cut off Machine main, forced shaft equipment and rack convergence is not strong, rolling spirit is not sensitive; brake equipment action is not sensitive. Check the guide wheel device with the slider device orientation, the cooperation gap is not fit with the assembly drawing request. Check the forced shaft assembly in the course of the work of elasticity is not smooth, with or without dry tone. Check the drive shaft pulley with the main motor pulley device orientation is not fit drawings request, V-belt type, preload is not fit the standard request. Check the various parts of the device is not fit the drawings request, and a variety of security signs is not complete, is not fixed in the eye-catching position. The above is the machine for the accessories device is not lacking, in addition to look at these also depends on the reinforced Electric Tile Cut off Machine straightening wheel is what raw materials, electric computer version of the system is what system, one can remember the number of batches, the machine cylinder How much, what kind of solenoid valve and so on these questions, these are also particularly important, accessories are good accessories, then the quality of all machines is certainly superior machine.

Contact Us
Shanghai Yongran Construction Machinery Manufacturing Co.,Ltd

Address: No.25 Xinnuo Road, Xinshen Industrial Park, Zhelin, Fenxian, Shanghai, China

Tel: +86-21-57490150

Fax: +86-21-37523099

E-mail: sales@yongran-dida.com

Copyright © Shanghai Yongran Construction Machinery Manufacturing Co.,Ltd. All Rights Reserved.
foottop