• img1
  • img2
  • img3

+86-21-57490150

sales@yongran-dida.com

Home > News > Content
How To Operate And Maintain Electric Brick And Stone Cut Off Machine?

How to operate and maintain Electric Brick and Stone Cut off Machine?

Electric Brick and Stone Cut off Machine appearance seems not complex, but a lot of matters need attention in the operation, such not only can ensure the safety of the staff, can also extend the service life of electric stone cutting machine.

How to operate the Electric Brick and Stone Cut off Machine?

1. The algebraic difference of the maximum limit dimension reduction basic size is the upper deviation; The algebraic difference of the minimum limit dimension minus the base size is the lower deviation. The actual size of the workpiece is in the range of maximum and minimum limit size (including limit size).

2, the operator is able to find drawings and process documents according to the production instructions and do the work strictly according to the requirements of the drawings and process documents

3. Commonly used gauges and precautions. Shearing machine shearing is commonly used with steel ruler (steel tape, steel tape, steel ruler, etc.) and vernier calipers. Measured by steel rule, to pay attention to the initial calibration of steel rule and the edge of the workpiece (starting point) measurement are collocated, and attention should be paid to the edge of the steel rule itself and the parts should be kept intact. Using vernier caliper, before the measurement should be for two CARDS vernier caliper to fold when not pervious to light, folded card feet cursor after the zero line should be zero alignment with the main ruler, vernier on the main feet move to flexible, should not be too tight, too loose or shaking phenomenon; When measuring, the foot should be gently touched on the surface of the workpiece, the measuring force should be as small as possible, preferably at zero. The position of the foot of the card should be straightened, not skewed.

4. The workpiece shall comply with the first inspection system and the "three inspection system" (self-inspection, mutual inspection and special inspection); The operator should also observe the "three processes" activity to check the processing quality of the workpiece in the previous process, ensuring the processing quality of the workpiece in this process and the idea of setting up the service of the next process.

2. How to maintain the Electric Brick and Stone Cut off Machine?

Then increase Electric Brick and Stone Cut off Machine life the first point is, must be in accordance with the operation method to use of this machine. This is ready to increase the service life of the first step: oh, and this is the most critical first step. Then the second point is to regularly for Electric Brick and Stone Cut off Machine "come on", that is some place need how long each to make the place to add some oil to prevent the machine rust, because language is the rust is very easy to make the machine less flexible. Also, check appliances is safe, is reliable, allowing people to safe operation, it is also affect Electric Brick and Stone Cut off Machine lifespan of a key. Another is to check the switch of the machine and other place to see if there is damage phenomenon. After I finish these, then, the key is the final step is to work every day, to the Electric Brick and Stone Cut off Machine machine to clean, it will be some useless or clean up the impurities. Only do each step standard, so words can only make Electric Brick and Stone Cut off Machine increase longevity.


Contact Us
Shanghai Yongran Construction Machinery Manufacturing Co.,Ltd

Address: No.25 Xinnuo Road, Xinshen Industrial Park, Zhelin, Fenxian, Shanghai, China

Tel: +86-21-57490150

Fax: +86-21-37523099

E-mail: sales@yongran-dida.com

Copyright © Shanghai Yongran Construction Machinery Manufacturing Co.,Ltd. All Rights Reserved.
foottop