• img1
  • img2
  • img3

+86-21-57490150

sales@yongran-dida.com

Home > News > Content
Electric Brick And Stone Cut Off Machine Numerical Control System Maintenance Focus

Electric Brick and Stone Cut off Machine numerical control system maintenance focus
CNC Electric Brick and Stone Cut off Machine can be said to be a high-precision, high efficiency equipment for such equipment must extend the life of components and parts of the wear cycle in order to improve the system's trouble-free working hours and equipment life The But how should this be done?
    As the Electric Brick and Stone Cut off Machine in some of the CMOS memory in the memory content in the power, mainly by battery-powered to maintain, it must regularly check and replace the equipment memory battery, so as not to come in handy. Generally here are lithium batteries or rechargeable nickel-cadmium batteries, when the battery voltage drops to a certain value will cause the parameters are lost, so check the main content is the battery voltage.
    If the contents of the Electric Brick and Stone Cut off Machine control system with battery voltage dropped to a limited value, or the battery voltage alarm, it is necessary to replace the battery as soon as possible. Replace the battery in the CNC system power state, so as not to cause the storage of data loss. Once the parameter is lost, the parameter can be re-entered after the new battery has been replaced.
    In addition to maintenance, but also should be as much as possible to reduce the Electric Brick and Stone Cut off Machine CNC system, the number of electrical doors of the switch to prevent dust into the CNC device. Because the air in the workshop floating dust and metal powder in the printed circuit board and electrical connectors, likely to cause the insulation resistance between components decreased, resulting in failure, and even damage the components.
    Some spindle control system is placed in a strong cabinet, the strong power off the door will lead to damage to the electrical components, spindle control failure, it must ensure the tightness of the strong doors to prevent the external dust into the cabinet inside, thus affecting The normal operation of the system.
Electric Brick and Stone Cut off Machine is a high-capacity machine, it is obviously better than other cutting processing technology; at the same time, water cutting equipment is also complete will not produce harmful gases or liquids, but also will not be in the workpiece Surface heat, so the water knife cutting should be the real multi-functional Karma, high efficiency cold cutting processing.
    But the characteristics of Electric Brick and Stone Cut off Machine by its numerical control operation software, must accurately operate the Electric Brick and Stone Cut off Machine control software, in order to ensure the cutting quality, cutting efficiency and cutting costs are consistent with the above characteristics. The next thing to tell is that some of the conventional functions of the Electric Brick and Stone Cut off Machine software.
 Operation of the Electric Brick and Stone Cut off Machine software, if selected single, it is necessary to emulate from scratch or from any segment simulation, each press the keyboard, simulation NC code in a line; if the curve, then the whole curve of a simulation; If unchecked, the simulation is a continuous emulation mode.

Contact Us
Shanghai Yongran Construction Machinery Manufacturing Co.,Ltd

Address: No.25 Xinnuo Road, Xinshen Industrial Park, Zhelin, Fenxian, Shanghai, China

Tel: +86-21-57490150

Fax: +86-21-37523099

E-mail: sales@yongran-dida.com

Copyright © Shanghai Yongran Construction Machinery Manufacturing Co.,Ltd. All Rights Reserved.
foottop